Order before
 
Hours
 
Mins
 
Secs
For delivery tomorrow
01962 732325
Mon - Fri 9am - 5pm

Sealing cement based paving

Always follow instructions on the product labels, technical information and videos.

Always test products on a small area first.

Please Contact Us if you have any queries.

 

 

 

 

To Seal and Leave the Stone with it's Dry Colour use Lantania Hidro TW. Always test a small area first. Follow all product instructions. You will find guidance and video instructions on the product page. Call us if you have any queries.

To Seal and Enhance the Colour of the Stone use Patio Seal Porous Plus. Always test a small area first. Follow all product instructions. You will find guidance and video instructions on the product page. Call us if you have any queries.

Further Information.

Your stone must be clean and dry before you seal it. If you have any queries regarding cleaning cement based paving please click here or see the article, below.

Some questions you may have:

 

Why seal?

We have over twenty years experience assisting customers to Clean, Seal and Maintain their stone.

Providing you use the correct products to seal your stone it will remain in good condition and be much more resistant to staining and algae.

Sealed stone requires far less maintenance than unsealed stone.

The products we supply are high performance and relatively easy to use.

 

What are Impregnating Sealers?

We only supply breathable, impregnating sealers that are designed specifically for natural stone. These products soak into the surface of the stone and do not give any kind of surface coating, sheen or shine whatsoever.

Please note: products that do not breathe (do not allow moisture to escape) or leave a surface coating on the stone or make the surface at all "shiny" or are not designed specifically for natural stone are not fit for the purpose of sealing your stone.

 

Colour Enhancement?

We have products that will leave the appearance of your stone virtually unchanged (no sheen, no shine, no surface coating, no colour change).

We also have products that will bring out some of the colour of a stone (again, with no sheen or shine or surface coating whatsoever).

What will my stone look like if I use a colour enhancing sealer?

Look at your stone when it is completely dry. Then make the stone wet. Now imagine the colour of the stone about halfway towards the wet colour (with no sheen or shine). This is what it will look like with the colour enhancing products.

There are advantages when you use the colour enhancing products but the choice is yours.

Related posts
Cleaning cement based paving

Removing cement, efflorescence, mud, algae, leaf and plant stains, bird droppings, BBQ grease, food stains, drink stains etc

View article
Linked products
Lantania Hidro TW - 1L
Lantania Hidro TW - 1L
Water and oil protection for unpolished stone, marble and granite
Limited stock
Out of stock
£25.56 (inc VAT)
£21.30 (ex VAT)
Back to Guidance & assistance
Don't want to Do-It-Yourself?
NEED A CONTRACTOR?

Don’t want to Do-It-Yourself? We can do the work for you or put you in touch with a contractor

Know what you want?
BROWSE PRODUCTS
View our range of stone and tile, cleaning, sealing and maintenance products
Need some advice?
ASK US A QUESTION

Ask us a question or send us a picture of the problem and we will give you the benefit of 30 years of experience

Contact us for help